ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

3.Enter the settings as explained in the following table:

Table 19. DMZ Setup screen settings for IPv6

Setting

Description

 

 

 

 

 

 

DMZ Port Setup

 

 

 

 

 

 

 

Do you want to

Select one of the following radio buttons:

enable DMZ Port?

Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and

 

Subnet Mask fields.

 

No. Allows you to disable the DMZ port after you have configured it.

 

 

 

 

 

IPv6 Address

Enter the IP address of the DMZ port. Make sure that the DMZ

 

 

port IP address, LAN port IP address, and WAN port IP

 

 

address are in different subnets. The default IP address for the

 

 

DMZ port is 176::1.

 

Prefix Length

Enter the IPv6 prefix length, for example, 10 or 64. The default

 

 

prefix length for the DMZ port is 64.

 

 

 

 

DHCPv6 for DMZ Connected Computers

 

 

DHCP Status

Specify the status of the DHCPv6 server:

 

Disable DHCPv6 Server. This is the default setting, and the DHCPv6 fields are

 

masked out.

 

 

 

Enable the DHCPv6 Server. If you enable the server, you need to complete the

 

DHCPv6 fields.

 

 

 

DHCP Mode

Select one of the DHCPv6 modes from the drop-down list:

 

 

Stateless. The IPv6 clients generate their own IP address by

 

 

using a combination of locally available information and

 

 

router advertisements, but receive DNS server information

 

 

from the DHCPv6 server. For stateless DHCPv6, you need to

 

 

configure the RADVD and advertisement prefixes (see

 

 

Configure the IPv6 Router Advertisement Daemon and

 

 

Advertisement Prefixes for the DMZ on page 93).

 

 

Stateful. The IPv6 clients obtain an interface IP address,

 

 

configuration information such as DNS server information,

 

 

and other parameters from the DHCPv6 server. The IP

 

 

address is a dynamic address. (see IPv6 DMZ Address

 

 

Pools on page 92).

 

 

 

 

Domain Name

Enter the domain name of the DHCP server.

 

 

 

 

Server Preference

Enter the DHCP server preference value. The possible values

 

 

are 0–255, with 255 as the default setting.

 

 

This is an optional setting that specifies the server’s preference

 

 

value in a server advertise message. The client selects the

 

 

server with the highest preference value as the preferred

 

 

server.

LAN Configuration

91

Page 91
Image 91
NETGEAR FVS318N manual DMZ Setup screen settings for IPv6, DHCPv6 for DMZ Connected Computers