Network and System Management
329
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
System Management
•Change Passwords and Administrator and Guest Settings
•Configure Remote Management Access
•Use the Command-Line Interface
•Use a Simple Network Management Protocol Manager
•Manage the Configuration File
•Update the Firmware
•Configure Date and Time Service

Change Passwords and Administrator and Guest Settings

The default administrator and default guest passwords for the web management interface are
both password. NETGEAR recommends that you change the password for the administrator
account to a more secure password, and that you configure a separate secure password for
the guest account.
Note: For general information about user accounts, passwords, and login
settings, see Configure User Accounts on page 303 and Set User
Login Policies on page 306.
To modify the administrator and guest passwords and idle time-out settings:
1. Select Users > Users. The Users screen displays. (The following figure shows the
wireless VPN firewall’s default users—admin and guest—and, as an example, several
other users in the List of Users table.)
Figure 196.