NETGEAR FVS318N manual  To specify the global parameters, 217

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 49. VPN client IPSec configuration settings (continued)

Setting	Description
PFS and Group	Select the PFS check box, and then select the DH2 (1024) key group from the
	drop-down list.
	Note: On the wireless VPN firewall, this key group is referred to as Diffie-Hellman
	Group 2 (1024 bit).

4.Click Apply to use the new settings immediately, and click Save to keep the settings for future use.

Configure the Global Parameters

To specify the global parameters:

1.Click Global Parameters in the left column of the Configuration Panel screen. The Global Parameters pane displays in the Configuration Panel screen:

Figure 130.

2.Specify the default lifetimes in seconds:

•Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change this setting to 28800 seconds to match the configuration of the wireless VPN firewall.

•Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this setting to 3600 seconds to match the configuration of the wireless VPN firewall.

3.Click Apply to use the new settings immediately, and click Save to keep the settings for future use.

The wireless VPN firewall configuration is now complete.

Virtual Private Networking Using IPSec and L2TP Connections

217