NETGEAR FVS318N manual Has assigned one. You can leave this field blank

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 3. PPTP and PPPoE settings (continued)

Setting	Description
Other (PPPoE)	If you have installed login software, then your connection type is PPPoE. Select this
Note: For login	radio button, and enter the following settings:
	Account Name	The valid account name for the PPPoE connection.
and password
information, see	Domain Name	The name of your ISP’s domain or your domain name if your ISP
Step 2 and Step 3.
		has assigned one. You can leave this field blank.
	Idle Timeout	Select the Keep Connected radio button to keep the connection
		always on. To log out after the connection is idle for a period, select
		the Idle Timeout radio button and, in the Idle Timeout field, enter the
		number of minutes to wait before disconnecting. This is useful if your
		ISP charges you based on the period that you have logged in.
	Connection	Select the Connection Reset check box to specify a time when the
	Reset	PPPoE WAN connection is reset, that is, the connection is
		disconnected momentarily and then reestablished. Then specify the
		disconnect time and delay.
		Disconnect	Specify the hour and minutes when the connection
		Time	should be disconnected.
		Delay	Specify the period in seconds after which the
			connection should be reestablished.

6.In the Internet (IP) Address section of the screen (see the following figure), configure the IP address settings as explained in the following table. Click the Current IP Address link to see the currently assigned IP address.

IPv4 and IPv6 Internet and Broadband Settings

33