NETGEAR FVS318N manual Power Left LAN LEDs, Green, one for each port, Active WAN LED, Test LED

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

The front panel also contains three groups of status indicator light-emitting diodes (LEDs), including Power and Test LEDs, LAN LEDs, and WAN LEDs, all of which are explained in detail in the following table. Some LED explanation is provided on the front panel.

Power	Left LAN LEDs	Left WAN LED
LED	(green, one for each port)	(green)

	Wireless LED	Right LAN LEDs	Right WAN LED
		(one for each port)
		DMZ LED	Active WAN LED
Test LED
Figure 1.

The following table describes the function of each LED.

Table 1. LED descriptions

LED	Activity	Description
Power LED	On (green)	Power is supplied to the wireless VPN firewall.
	Off	Power is not supplied to the wireless VPN firewall.
Test LED	On (amber) during	Test mode. The wireless VPN firewall is initializing. After approximately 2
	startup.	minutes, when the wireless VPN firewall has completed its initialization, the
		Test LED goes off.
	On (amber) during	The initialization has failed, or a hardware failure has occurred.
	any other time
	Blinking (amber)	The wireless VPN firewall is writing to flash memory (during upgrading or
		resetting to defaults).
	Off	The wireless VPN firewall has booted successfully.

Introduction

16