NETGEAR FVS318N manual Configure Login Restrictions Based on IPv4 Addresses, 307

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

3.Make the following optional selections:

•To prohibit the user from logging in to the wireless VPN firewall, select the Disable Login check box.

•To prohibit the user from logging in from the WAN interface, select the Deny Login from WAN Interface check box. In this case, the user can log in only from the LAN interface.

Note: For security reasons, the Deny Login from WAN Interface check box is selected by default for guests and administrators. The Disable Login check box is disabled (masked out) for administrators.

4.Click Apply to save your settings.

Configure Login Restrictions Based on IPv4 Addresses

To restrict logging in based on IPv4 addresses:

1.Select Users > Users. The Users screen displays (see Figure 184 on page 304).

2.In the Action column of the List of Users table, click the Policies table button for the user for which you want to set login policies. The policies submenu tabs display, with the Login Policies screen in view.

3.Click the By Source IP Address submenu tab. In the upper right of the screen, the IPv4 radio button is selected by default. The By Source IP Address screen displays the IPv4 settings. (The following figure shows an IP address in the Defined Addresses table as an example.)

Figure 187.

Manage Users, Authentication, and VPN Certificates

307