NETGEAR FVS318N manual VLAN, the default start IP address is

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 11. Add VLAN Profile screen settings (continued)

Setting	Description
Enable DHCP Server	Select the Enable DHCP Server radio button to enable the wireless VPN firewall
	to function as a Dynamic Host Configuration Protocol (DHCP) server, providing
	TCP/IP configuration for all computers connected to the VLAN. (For the default
	VLAN, the DHCP server is enabled by default.) Enter the following settings:
	Domain Name	This setting is optional. Enter the domain name of the
		wireless VPN firewall.
	Start IP Address	Enter the start IP address. This address specifies the first of
		the contiguous addresses in the IP address pool. Any new
		DHCP client joining the LAN is assigned an IP address
		between this address and the end IP address. For the default
		VLAN, the default start IP address is 192.168.1.100.
	End IP Address	Enter the end IP address. This address specifies the last of
		the contiguous addresses in the IP address pool. Any new
		DHCP client joining the LAN is assigned an IP address
		between the start IP address and this IP address. For the
		default VLAN, the default end IP address is 192.168.1.254.
		The start and end DHCP IP addresses should be in the same
		network as the LAN IP address of the wireless VPN firewall
		(that is, the IP address in the IP Setup section as described
		earlier in this table).
	Primary DNS	This setting is optional. If an IP address is specified, the
	Server	wireless VPN firewall provides this address as the primary
		DNS server IP address. If no address is specified, the
		wireless VPN firewall uses the VLAN IP address as the
		primary DNS server IP address.
	Secondary DNS	This setting is optional. If an IP address is specified, the
	Server	wireless VPN firewall provides this address as the secondary
		DNS server IP address.
	WINS Server	This setting is optional. Enter a WINS server IP address to
		specify the Windows NetBIOS server, if one is present in your
		network.
	Lease Time	Enter a lease time. This specifies the duration for which IP
		addresses are leased to clients.
DHCP Relay	To use the wireless VPN firewall as a DHCP relay agent for a DHCP server
	somewhere else in your network, select the DHCP Relay radio button. Enter the
	following setting:
	Relay Gateway	The IP address of the DHCP server for which the wireless
		VPN firewall serves as a relay.

LAN Configuration

62