NETGEAR manual ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

For the DMZ, there are two DHCPv6 server options:

•Stateless DHCPv6 server. The IPv6 clients in the DMZ generate their own IP address by using a combination of locally available information and router advertisements, but receive DNS server information from the DHCPv6 server. For stateless DHCPv6, you need to configure the RADVD and advertisement prefixes (see Configure the IPv6 Router Advertisement Daemon and Advertisement Prefixes for the DMZ on page 93).

•Stateful DHCPv6 server. The IPv6 clients in the DMZ obtain an interface IP address, configuration information such as DNS server information, and other parameters from the DHCPv6 server. The IP address is a dynamic address. For stateful DHCPv6, you need to configure IPv6 address pools (see IPv6 DMZ Address Pools on page 92).

To enable and configure the DMZ port for IPv6 traffic:

1. Select Network Configuration > DMZ Setup.

2. In the upper right of the screen, select the IPv6 radio button. The DMZ Setup screen displays the IPv6 settings:

Figure 45.

LAN Configuration

90