NETGEAR FVS318N manual Add SSL VPN Policy screen settings, 286, Setting Description Policy For

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

4.Complete the settings as explained in the following table:

Table 70. Add SSL VPN Policy screen settings

Setting Description

Policy For

Select one of the following radio buttons to specify the type of SSL VPN policy:

•Global. The new policy is global and includes all groups and users.

•Group. The new policy needs to be limited to a single group. From the drop-down list, select a group

name. For information about how to create groups, see Configure Groups on page 300.

•User. The new policy needs to be limited to a single user. From the drop-down list, select a user name. For information about how to create user accounts, see Configure User Accounts on page 303.

Add SSL VPN Policies

Apply	Select one of the following radio buttons to specify how the policy is applied. When you select
Policy to?	a radio button, the fields and drop-down lists that apply to your selection (see explanations
	later in this table) unmask onscreen.
	• Network Resource. The policy is applied to a network resource that you have defined on
	the Resources screen (see Use Network Resource Objects to Simplify Policies on
	page 279).
	• IP Address. The policy is applied to a single IP address.
	• IP Network. The policy is applied to a network address.
	• All Addresses. The policy is applied to all addresses.
	Network	Policy Name	A descriptive name of the SSL VPN policy for identification and
	Resource		management purposes.
		Defined	From the drop-down list, select a network resource that you
		Resources	have defined on the Resources screen (see Use Network
			Resource Objects to Simplify Policies on page 279).
		Permission	From the drop-down list, select Permit or Deny to specify
			whether the policy permits or denies access.
	IP Address	Policy Name	A descriptive name of the SSL VPN policy for identification and
			management purposes.
		IP Address	The IPv4 or IPv6 address to which the SSL VPN policy is
			applied.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank to
			apply the policy to all traffic.
		Service	From the drop-down list, select the service to which the SSL
			VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.

Virtual Private Networking Using SSL Connections

286