Virtual Private Networking Using IPSec and L2TP Connections
203
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 115.
b. Locate the policy in the table, and click the Connect table button. The IPSec VPN
connection becomes active.
Note: When using FQDNs, if the Dynamic DNS service is slow to update
its servers when your DHCP WAN address changes, the VPN tunnel
will fail because the FQDNs do not resolve to your new address. If
you have the option to configure the update interval, set it to an
appropriately short time.
Create an IPv4 Client-to-Gateway VPN Tunnel with the Wizard
Figure 116.
To configure a VPN client tunnel, follow the steps in the following sections:
•Use the VPN Wizard to Configure the Gateway for a Client Tunnel on page 204.
•Use the NETGEAR VPN Client Wizard to Create a Secure Connection on page 206 or
Manually Create a Secure Connection Using the NETGEAR VPN Client on page 211.