NETGEAR FVS318N manual  To edit an IKE policy, 229, Setting Description Extended Authentication

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 52. Add IKE Policy screen settings (continued)

Setting	Description
Extended Authentication
XAUTH Configuration	Select one of the following radio buttons to specify whether Extended
	Authentication (XAUTH) is enabled, and, if enabled, which device is used to verify
	user account information:
Note: For more	• None. XAUTH is disabled. This the default setting.
information about	• Edge Device. The wireless VPN firewall functions as a VPN concentrator on
XAUTH and its	which one or more gateway tunnels terminate. The authentication modes that
authentication modes,	are available for this configuration are User Database, RADIUS PAP, or RADIUS
see Configure XAUTH	CHAP.
for VPN Clients on	• IPSec Host. The wireless VPN firewall functions as a VPN client of the remote
page 239.
	gateway. In this configuration, the wireless VPN firewall is authenticated by a
	remote gateway with a user name and password combination.
	Authentication	For an Edge Device configuration, from the drop-down list,
	Type	select one of the following authentication types:
		• User Database. XAUTH occurs through the wireless VPN
		firewall’s user database. You can add users on the Add
		User screen (see User Database Configuration on
		page 240).
		• Radius PAP. XAUTH occurs through RADIUS Password
		Authentication Protocol (PAP). The local user database is
		first checked. If the user account is not present in the local
		user database, the wireless VPN firewall connects to a
		RADIUS server. For more information, see RADIUS Client
		and Server Configuration on page 240.
		• Radius CHAP. XAUTH occurs through RADIUS Challenge
		Handshake Authentication Protocol (CHAP). For more
		information, see RADIUS Client and Server Configuration
		on page 240.
	Username	The user name for XAUTH.
	Password	The password for XAUTH.

5.Click Apply to save your settings. The IKE policy is added to the List of IKE Policies table.

To edit an IKE policy:

1.Select VPN > IPSec VPN. The IPSec VPN submenu tabs display with the IKE Policies screen for IPv4 in view (see Figure 139 on page 223).

2.Specify the IP version for which you want to edit an IKE policy:

•IPv4. In the upper right of the screen, the IPv4 radio button is already selected by default. Go to Step 3.

•IPv6. Select the IPv6 radio button. The IKE Policies screen for IPv6 displays.

3.In the List of IKE Policies table, click the Edit table button to the right of the IKE policy that you want to edit. The Edit IKE Policy screen displays. This screen shows the same fields as the Add IKE Policy screen (see Figure 140 on page 225).

Virtual Private Networking Using IPSec and L2TP Connections

229