NETGEAR FVS318N manual  To delete one or more advertisement prefixes

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To delete one or more advertisement prefixes:

1.On the RADVD screen for the LAN (see Figure 41 on page 81), select the check box to the left of each advertisement prefix that you want to delete, or click the Select All table button to select all advertisement prefixes.

2.Click the Delete table button.

Configure IPv6 Multihome LAN IP Addresses on the Default VLAN

If you have computers using different IPv6 networks in the LAN (for example, FEC0::2 or FEC0::1000:10), you can add aliases to the LAN ports and give computers on those networks access to the Internet, but you can do so only for the default VLAN.

The IP address that is assigned as a secondary IP address needs to be unique and cannot be assigned to a VLAN.

Make sure that any secondary LAN addresses are different from the primary LAN, WAN, and DMZ IP addresses and subnet addresses that are already configured on the wireless VPN firewall. The following is an example of correctly configured IPv6 addresses:

•WAN IP address. 2000::e246:9aff:fe1d:1a9c with a prefix length of 64

•DMZ IP address. 176::e246:9aff:fe1d:a1bc with a prefix length of 64

•Primary LAN IP address. FEC0::1 with a prefix length of 10

•Secondary LAN IP address. 2001:db8:3000::2192 with a prefix length of 10.

To add a secondary LAN IPv6 address:

1. Select Network Configuration > LAN Setup > LAN Multi-homing.

2. In the upper right of the screen, select the IPv6 radio button. The LAN Multi-homing screen displays the IPv6 settings. (The following figure contains one example.)

Figure 43.

LAN Configuration

84