NETGEAR FVS318N manual Connection Method Manual Data Input Required, Pptp

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 2. IPv4 Internet connection methods

Connection Method	Manual Data Input Required
DHCP (Dynamic IP)	No manual data input is required.
PPPoE	The following fields are required:
	• Login
	• Password
	• Account Name
	• Domain Name
PPTP	The following fields are required:
	• Login
	• Password
	• Account Name
	• Domain Name
	• My IP Address
	• Server IP Address
Fixed (Static) IP	The following fields are required:
	• IP Address
	• IP Subnet Mask
	• Gateway IP Address
	• Primary DNS Server
	• Secondary DNS Server

•If the autodetect process does not find a connection, you are prompted either to check the physical connection between your wireless VPN firewall and the cable, DSL line, or satellite or wireless Internet dish, or to check your wireless VPN firewall’s MAC address. For more information, see Configure Advanced WAN Options and Other Tasks on page 50 and Troubleshoot the ISP Connection on page 382.

3.To verify the connection, click the Broadband Status option arrow in the upper right of the screen to display the Connection Status pop-up screen. (The following figure shows a static IP address configuration.)

Figure 11.

IPv4 and IPv6 Internet and Broadband Settings

30