NETGEAR FVS318N IPv6 LAN WAN Outbound Rules,  To create a new IPv6 LAN WAN outbound rule, 142

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IPv6 LAN WAN Outbound Rules

To create a new IPv6 LAN WAN outbound rule:

1.In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen displays the IPv6 settings (see Figure 64 on page 139).

2.Click the Add table button under the Outbound Services table. The Add LAN WAN Outbound Service screen for IPv6 displays:

Figure 66.

3.Enter the settings as explained in Table 33 on page 131. In addition to selections from the Service, Action, and Log drop-down lists, you need to make selections from the following drop-down lists:

•LAN Users

•WAN Users

Unless your selection from the Action drop-down list is BLOCK always, you also need to make a selection from the following drop-down lists:

•Select Schedule

•QoS Priority

4.Click Apply to save your changes. The new rule is now added to the Outbound Services table.

Firewall Protection

142