NETGEAR FVS318N manual 139

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

•Edit. Allows you to make any changes to the definition of an existing rule. Depending on your selection, one of the following screens displays:

-Edit LAN WAN Outbound Service screen for IPv4 (identical to Figure 65 on page 141)

-Edit LAN WAN Inbound Service screen for IPv4 (identical to Figure 67 on page 144)

To change the default outbound policy for IPv6 traffic or to change existing IPv6 rules:

1. Select Security > Firewall. The Firewall submenu tabs display with the LAN WAN Rules screen for IPv4 in view.

2. In the upper right of the screen, select the IPv6 radio button. The LAN WAN Rules screen displays the IPv6 settings. (The following figure contains examples.)

Figure 64.

3.From the Default Outbound Policy drop-down list, select Block Always. (By default, Allow Always is selected.)

4.Next to the drop-down list, click the Apply table button.

To change an existing outbound or inbound service rule, in the Action column to the right of the rule, click one of the following table buttons:

•Up. Moves the rule up one position in the table rank.

•Down. Moves the rule down one position in the table rank.

•Edit. Allows you to make any changes to the definition of an existing rule. Depending on your selection, one of the following screens displays:

-Edit LAN WAN Outbound Service screen for IPv6 (identical to Figure 66 on page 142)

-Edit LAN WAN Inbound Service screen for IPv6 (identical to Figure 68 on page 145)

Firewall Protection

139