NETGEAR FVS318N manual View the Status of a Wireless Profile, 122

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

WARNING:

When you configure the wireless VPN firewall from a wireless computer whose MAC address is not in the access control list and when the ACL policy status is set to deny access, you will lose your wireless connection when you click Apply. You then need to access the wireless VPN firewall from a wired computer or from a wireless computer that is on the access control list to make any further changes.

To remove one or more MAC addresses from the table:

1.In the MAC Address table, select the check box to the left of each MAC address that you want to delete, or click the Select All table button to select all MAC addresses.

2.Click the Delete table button.

View the Status of a Wireless Profile

To view the status of a specific wireless profile:

On the Wireless Profiles screen (see Figure 56 on page 115), click the Status button in the Status column for the wireless profile for which you want to display the status information. The Wireless Profile Status screen displays:

Figure 59.

To change the poll interval period, enter a new value in the Poll Interval field, and then click Set interval. To stop polling, click Stop.

The following table explains the fields of the Wireless Profile Status screen.

Wireless Configuration and Security

122