NETGEAR FVS318N manual 345, Http//support.ntp.org/bin/view/Servers/WebHome

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 83. Time Zone screen settings (continued)

Setting	Description
NTP Servers (default or	Select one of the following radio buttons to specify the NTP servers:
custom)	• Use Default NTP Servers. The wireless VPN firewall regularly updates its
	RTC by contacting a default NETGEAR NTP server on the Internet.
	• Use Custom NTP Servers. The wireless VPN firewall regularly updates its
	RTC by contacting one of two custom NTP servers (primary and backup),
	both of which you need to specify in the fields that become available with this
	selection.
	Note: If you select the Use Custom NTP Servers option but leave either the
	Server 1 or Server 2 field blank, both fields are set to the default NETGEAR
	NTP servers.
	Note: A list of public NTP servers is available at
	http://support.ntp.org/bin/view/Servers/WebHome.
NTP Servers (custom)	Server 1 Name / IP Address	Enter the IP address or host name of the primary
		NTP server.
	Server 2 Name / IP Address	Enter the IP address or host name of the backup
		NTP server.

3.Click Apply to save your settings.

Note: If you select the default NTP servers or if you enter a custom server FQDN, the wireless VPN firewall determines the IP address of the NTP server by performing a DNS lookup. Before the wireless VPN firewall can perform this lookup, you need to configure a DNS server address on the Broadband ISP Settings screen (see Manually Configure an IPv4 Internet Connection on page 31.)

Network and System Management

345