ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Note: If you have configured SSL VPN user policies, make sure that secure HTTP remote management is enabled (see Configure Remote Management Access on page 331). If secure HTTP remote management is not enabled, all SSL VPN user connections are disabled.

To edit an SSL VPN policy:

1.On the Policies screen (see Figure 170 on page 284), click the Edit button in the Action column for the SSL VPN policy that you want to modify. The Edit SSL VPN Policy screen displays. This screen is identical to the Add SSL VPN Policy screen (see the previous figure).

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more SSL VPN policies:

1.On the Policies screen (see Figure 170 on page 284), select the check box to the left of each SSL VPN policy that you want to delete, or click the Select All table button to select all policies.

2.Click the Delete table button.

Access the New SSL Portal Login Screen

All screens that you can access from the SSL VPN menu of the web management interface

display a user portal link in the upper right of the screen, above the menu bars (

).

When you click the User Portal link, the SSL VPN default portal opens (see Figure 176 on page 291). This user portal is not the same as the new SSL portal login screen that you

defined in Create the Portal Layout on page 268.

To open the new SSL portal login screen:

1. Select VPN > SSL VPN > Portal Layouts.

Virtual Private Networking Using SSL Connections

288

Page 288
Image 288
NETGEAR FVS318N manual Access the New SSL Portal Login Screen,  To edit an SSL VPN policy, 288