NETGEAR manual ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N, 252

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Note: Perform these tasks from a computer that has the NETGEAR

ProSafe VPN Client installed.

To configure the VPN client for Mode Config operation, create authentication settings (phase 1 settings), create an associated IPSec configuration (phase 2 settings), and then specify the global parameters.

Configure the Mode Config Authentication Settings (Phase 1 Settings)

To create new authentication settings:

1.Right-click the VPN client icon in your Windows system tray, and select Configuration Panel. The Configuration Panel screen displays:

Figure 148.

2.In the tree list pane of the Configuration Panel screen, right-click VPN Configuration, and select New Phase 1.

Virtual Private Networking Using IPSec and L2TP Connections

252