NETGEAR FVS318N manual VPN client advanced authentication settings, 214

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

5.Click Apply to use the new settings immediately, and click Save to keep the settings for future use.

6.Click the Advanced tab in the Authentication pane. The Advanced pane displays:

Figure 128.

7.Specify the settings that are explained in the following table.

Table 48. VPN client advanced authentication settings

Setting	Description
Advanced features
Aggressive Mode	Select this check box to enable aggressive mode as the mode of negotiation with
	the wireless VPN firewall.
NAT-T	Select Automatic from the drop-down list to enable the VPN client and wireless
	VPN firewall to negotiate NAT-T.
Local and Remote ID
Local ID	As the type of ID, select DNS from the Local ID drop-down list because you
	specified FQDN in the wireless VPN firewall configuration.
	As the value of the ID, enter remote.com as the local ID for the VPN client.
	Note: The remote ID on the wireless VPN firewall is the local ID on the VPN
	client. It might be less confusing to configure an FQDN such as client.com as the
	remote ID on the wireless VPN firewall and then enter client.com as the local ID
	on the VPN client.

Virtual Private Networking Using IPSec and L2TP Connections

214