Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

Figure 2-4: Login screen on the Web browser

Note: Read-only access is provided by logging in as username guest and default password password.

Default Factory Settings

When you first receive your FVS124G, the default factory settings will be set as shown in Table 2-1below. You can restore these defaults with the Factory Defaults restore switch on the front panel — see “The Router’s Front Panel” on page 2-6.

Pressing this switch until the TEST LED blinks (approximately 10 seconds) causes the firewall to restore all factory default settings and reboot.

A shorter press and release causes the firewall to merely reboot.

2-10

Introduction

202-10085-01, March 2005

Page 28
Image 28
NETGEAR FVS124G manual Default Factory Settings, Login screen on the Web browser