Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

Inbound Rule Example: Allowing Videoconference from Restricted Addresses

If you want to allow incoming videoconferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office, you can create an inbound rule. In the example shown in Figure 6-4, CU-SeeMe connections are allowed only from a specified range of external IP addresses.

Figure 6-4: Rule example: videoconference from restricted addresses

Inbound Rule Example: One-to-One NAT Mapping

This application note describes how to configure multi-NAT to support multiple public IP addresses on one WAN interface of a NETGEAR FVS124G ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports. By creating an inbound rule, we will configure the firewall to host an additional public IP addresses and associate this address with a web server on the LAN.

This procedure was developed and tested using:

Netgear FVS124G VPN Firewall with version 1.0 firmware

WAN1 IP address is 10.1.0.118

 

 

6-8

Firewall Protection and Content Filtering

202-10085-01, March 2005

Page 84
Image 84
NETGEAR FVS124G manual Inbound Rule Example One-to-One NAT Mapping