23
Preparing the Camera
Preparing the Camera, Basic Function
Setting the Language
Use this feature to select the language for the LCD
monitor display.
1Turn the power on (p. 30).
2Press the MENU
button and select
the [ (Set up)]
menu using the
button.
3Select
(Language) using
the or button
and press the SET
button.
4Select a language
using the , ,
or button and
press the SET
button.
zThe Set up menu will
reappear without changing the language
setting if you press the MENU button instead of
the SET button.
5Press the MENU button.
Shortcut Operation
The Language menu can also be displayed in
Playback mode by holding down the SET
button and pressing the MENU button. (This
function cannot be used while an image is
magnified or a movie clip is played back, or
when a printer is connected to the camera.)
EC156&157CUG_Eng.book Page 23 Friday, December 17, 2004 3:32 PM