Samsung SHR-4081P manual Transfer Protocol Settings

Transfer Protocol Settings

●You may choose the protocol type, either TCP or UDP. ADSL setup in the IP setup page can be made only to TCP.

●Port(TCP) can be selected from 554 to 998, increasing by 4.

Once the first digit is chosen, the rest 3 digits will follow the first digit.

●Port(UDP) can be selected from 8000 to 9760, increasing by 160. Once the front port is chosen, the rest ports will change accordingly.

●Unicast/Multicast has the default of Unicast and you may choose Multicast.

●Multicast IP shall be set to Multicast from Multicast/Unicast to be activated and for IP setup.

Sets up the D-Class IP address from 224.0.0.0 to 239.255.255.255.

●TTl shall be also set to Multicast from Multicast/Unicast to be activated and to choose a value from 1-255. The default is 5.

●DDNS Site

-You may select the DDNS Site as Off, Samsung DDNS, dyndns.com, no-ip.com, or changeip.com.

-If you select Off, the IP will not be registered in DDNS.

-If you select Samsung DDNS, the IP will be registered in the DDNS operated by

Samsung.

Select MAC Address as the Address Type in the Setup ➝ Site Setup ➝ DVR regis tration window of the SmartViewer, and enter the MAC Address of DVR (SHR-4081N/P), then you can connect remotely using the Samsung DDNS.

-dyndns.com, no-ip.com, and changeip.com are free Public DDNS websites that a URL can be allocated by registering a Dynamic IP.

Become a member of the desired website, register the URL, and then set up your

Host Name, User Name, and User Password.

Select URL as the Address Type in the Setup ➝ Site Setup ➝ DVR registration window of SmartViewer, and enter the Host Name (URL) that is allocated by the Public DDNS website, then you can connect remotely using the URL.

Note

If you set up the Public DDNS (dyndns.com, no-ip.com, or changeip.com), it will take approximately 30-60 seconds for the IP address of the Host Name (URL) to be updated in the DNS.

English 5-30