Samsung SHR-4081P manual HDD/External Device Setup, HDD Information, External HDD setup

Caution

[HDD Erase]

Data will not be deleted in backup or recording process.

Please be sure to suspend backup or recording before you delete any data. If the recording is in progress, stop the recording to delete a data.

[USB S/W Upgrade]

You may download the software for upgrade from CCTV Part of http://www.samsung.com. If the USB memory to be upgraded is not in a format supported by the DVR set, the upgrade cannot be done. In this case, please use “Remove Devices” from “System Information and Settings” in Menu 5-7. There should be only one file for upgrade in the USB memory.

HDD/External Device Setup

●HDD Information

Displays the number, quantity, and status of ATA, IEEE1394, and USB. Setup is not available.

Status : Internal HDD, External HDD, Backup HDD

●External HDD setup

1.Backup/External

You are able to determine the usage of IEEE1394 and USB. Not Defined ➝ When the connected HDD usage is not defined.

Expressed in External or Backup.

No Device ➝ When no HDD is connected. You are able to press right TAB after you connect HDD.

External ➝ When the connected HDD is set to External. It may used as a back up HDD if you press the “Enter” button and turn to Backup.

Backup ➝ When the connected HDD is set to Backup. It may used as an External HDD if you press the “Enter” button and turn to External.

2.Hot Plug - Connect/Disconnect

You may connect or disconnect IEEE1394 Hard Disk while power is supplied to the SHR-4081N/P main body.

① As for connecting, connect IEEE1394 Hard Disk with the SHR-4081N/P main

body and press “Connect”. Pressing “Connect” makes the SHR-4081N/P main body recognize all connected IEEE1394 Hard Disks.

➁As for disconnecting, be sure to press “Disconnect” and detach IEEE1394 Hard Disk from the SHR-4081N/P main body safely.(Be sure to pause recording or backup process.) Pressing “Disconnect” cancels and detaches all connected IEEE1394 Hard Disk.

English 5-8