Samsung SHR-4081P manual 8Network, IP Settings

8Network

IP Settings

●Connection Mode

Designates the kind of the network connected to the main body of SHR-4081N/P. Static IP : When the main body is connected to the network with Static IP. Dynamic IP : When the main body is connected to the network with Dynamic IP

supplied by DHCP.

ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.

●Bandwidth

Designate the speed of the network to which the SHR-4081N/P main body is connected. Unlimited/2Mbps/1Mbps/600Kbps/300Kbps

Caution

If the main frame is connected to a network that uses a high speed LAN, set the bandwidth to 1Mbps or 2Mbps. If the main frame is connected to a network that supports ADSL or lower bandwidth, set the bandwidth below 600Mbps, and set the Record Mode below CIF (STANDARD).

If you set a higher bandwidth or Record Mode in a network that only supports lower bandwidth, the network will be overloaded and the connection to the SmartViewer or video monitoring may not operate properly.

Note

If the Connection Mode is set to ADSL, the bandwidth of IP settings page will be locked to 300Kbps, and the protocol type of the transfer protocol settings page will be locked to TCP.

●Admin Password

The password for the connection between Smart Viewer and the set with the authority of Admin. The password can be as long as 8 digits.

Press "Enter" and the left number keys from 0 to 9 for setup.

●User Password

The password for Smart Viewer’s access to the set with the authority of general user.

●IP

Set up the IP address to connect the SHR-4081N/P main body to the network. In case of a fixed IP, you must input IP yourself.

In case of a flexible IP or ADSL(PPPoE), the IP allocated from the DHCP server or ADSL company. If you fail to connect DHCP or ADSL, 000.000.000.000 is displayed. Then, press "OK" to receive IP. If you repeatedly fail to connect DHCP or ADSL, turn the SHR-4081N/P main body power off and turn it on again before you retry connecting.

English 5-28