4Record Mode
NTSC |
PAL |
If you press the front “REC” button, the mode to be recorded will be determined.
☛For Event Recording Mode value setup, refer to
●Mode
On : Pressing the REC button starts recording the current channel.
Off : Even pressing the REC button does not affect current channel recording. The default is set to “On”.
●Video Size
Determines the size of a screen to be recorded.
Full D1 : 720 x 480(NTSC) / 720 x 576(PAL) ➝ Large(L)
Half D1 : 720 x 240(NTSC) / 720 x 288(PAL) ➝ Normal(N)
CIF : 352 x 240(NTSC) / 352 x 288(PAL) ➝ CIF(C)
Note
[Video Output]
"Full D1" setup for the resolution is available from the recording sheet number of 7.5ips(NTSC)/6.25ips(PAL)
"Half D1" setup for the resolution is available from the recording sheet number of 15ips(NTSC)/12.5ips(PAL)
Resolution “CIF” can be set from Recording page number “30.”
●Recording Resolution
Selects the recording resolution. VH(Very High) / H(High) / S(Standard) / L(Low).
●Rate
Determines Frame Rate to be recorded. Frame Rate means the number of screen recorded every second.
Set to 30ips(NTSC)/25ips(PAL), the system records too many screens per second and play continues intermittently since recording is more detailed. This is appropriate for concentrated monitoring zone setup.
Set to the one of 30ips / 15ips / 10ips / 7.5ips / 5ips / 3ips / 1ips (NTSC)
Set to the one of 25ips / 12.5ips / 8.33ips / 6.25ips / 5ips / 2.5ips / 1ips (PAL)
●Auto Deletion
Click [Off] button at the left bottom to select Off/On.
Select On to limit the search date by moving to the date selecting button. Select Off not to limit the search date.
The date is limited from 1 to 99.
