Samsung SHR-4081P 3Connecting IEEE1394 Device, IEEE1394 Device hard disk shall be set to Master

SHR-4081N/P USER’S MANUAL

3Connecting IEEE1394 Device

●Connect the IEEE1394 hard disk through the back port of SHR-4081N/P.

●You can connect up to 6 IEEE1394 armored hard disks by the Daisy-Chain method.

●After connection, Menu - System - HDD Setup is necessary for recognition and setup for use.

Caution

The IEEE1394 Device hard disk shall be set to Master.

●It acts as HOT PLUG to connect or disconnect the IEEE1394 device while the system is running.

●If you press Connect/Disconnect in Menu - System - HDD Setup, HOT PLUG will be recognized or deleted.

Note

See 5-8 System (HDD Setup) of User’s Manual.

Caution

-Wait until the HOT PLUG connected hard disk is stabilized enough (approx. 2 seconds per each hard disk) and click CONNECT in SHR-4081N/P MENU before use.

-Be sure to click DISCONNECT in SHR-4081N/P MENU to delete IEEE1394 Device safely. Failure of clicking DISCONNECT may cause improper operation of IEEE1394 Device.

3-3English