3Additional HDD Installation
Caution
[Checking HDD Data]
Please, pay attention to Following information to minimize the chance of losing HDD data.
-Remember that you should protect HDD from any impact or misuse as this may cause damaged.
-The Manufacturer is not responsible for missing data or defects caused by the user’s mishandling.
Note: Adding Extra HDD. Check in advance that the HDD is compatible with the manufacturer’s DVR.
Examples that can cause loss of data or damage HDD.
-Any outside Impact on the case which could happen whilst disassembling or setting up the DVR.
-Power cut or incorrect shutdown whilst the DVR is operating.
-Refer to page
-Moving or causing any impact on the DVR during operation. Please, back up events as soon as possible to minimize disappointment should HDD data be lost.
You may add up to 3 more HDDs to the product.
However, since the product contains has many parts which may incur electric shock, accident, or product breakdown and improper installation or setup may disturb HDD recognition or normal product operation, you shall consult with an expert of the agency where you bought the product.
[Caution for HDD Addition]
■Do not let the cable stuck improperly nor uncoated. (This may cause breakdown or fire.)
■Be careful not to cut yourself by sharp edges of the product.
■Be careful not to miss the disassembled screws or parts. Imperfect assembly due to short of screws or parts may cause breakdown or malfunctioning.
■Check the compatibility list of HDDs before installing additional HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor.
[Setting the Jumper]
The jumper setting method is illustrated on the surface of the purchased HDD.
Using SAMSUNG hard disk, the jumper setting method is as follows:
•HDD jumper for Primary Master and Primary Slave.
•Jumper setting for Secondary Master and Sencondary Slave.
