COMMAND LINE INTERFACE

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

When auto-negotiation is enabled with the negotiation command, the switch will negotiate the best settings for a link based on the capabilites command. When auto-negotiation is disabled, you must manually specify the link attributes with the speed-duplexand flowcontrol commands.

Example

The following example configures Ethernet port 5 capabilities to 100half, 100full and flow control.

Console(config)#interface ethernet 1/5

Console(config-if)#capabilities 100half

Console(config-if)#capabilities 100full

Console(config-if)#capabilities flowcontrol

Console(config-if)#

Related Commands

negotiation (4 -148)speed-duplex (4 -147) flowcontrol (4 -150)

flowcontrol

This command enables flow control. Use the no form to disable flow control.

Syntax

[no] flowcontrol

Default Setting

Flow control enabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

4-150

Page 391 Page 393
Page 392
Image 392
SMC Networks TigerSwitch manual Flowcontrol, Negotiation 4 -148speed-duplex 4 -147 flowcontrol 4, Flow control enabled
Page 391 Page 393

TigerSwitch specifications

The SMC Networks TigerSwitch series represents a robust line of Ethernet switches designed to cater to a wide range of networking needs, from small businesses to enterprise environments. With a strong emphasis on performance, reliability, and ease of use, the TigerSwitch series has garnered a reputation for delivering effective solutions for today’s demanding data communication requirements.

One of the standout features of the TigerSwitch is its support for Gigabit Ethernet, which enables higher data transfer rates and reduced latency. This performance boost is crucial for businesses that rely on bandwidth-heavy applications such as VoIP, video conferencing, and large file transfers. Many models in the series come with multiple Gigabit Ethernet ports, providing businesses with the flexibility to connect various devices and expand their networks seamlessly.

The TigerSwitch series also incorporates advanced Layer 2 switching capabilities, including features such as VLAN support and QoS (Quality of Service). VLAN support allows network administrators to segment network traffic, enhancing security and improving overall network performance. By segregating traffic based on user groups or applications, VLANs help manage bandwidth more effectively. QoS is particularly important in environments where voice and video services compete for bandwidth, as it prioritizes critical applications ensuring minimal interruptions in service quality.

Another key characteristic of the TigerSwitch is its user-friendly management interface. Many models come with web-based management capabilities, making it simpler for network administrators to configure settings, monitor performance, and troubleshoot issues. Additionally, the series supports SNMP (Simple Network Management Protocol), allowing for centralized network management and monitoring, which is essential for larger networks.

The TigerSwitch series also promotes energy efficiency, aligning with modern eco-friendly practices. Many of the switches feature Power over Ethernet (PoE) support, allowing them to deliver power to connected devices such as IP cameras and wireless access points over the same Ethernet cable used for data. This not only simplifies cabling requirements but also contributes to reducing overall power consumption, which is a consideration for both cost savings and environmental impact.

In conclusion, the SMC Networks TigerSwitch series stands out due to its combination of performance, advanced features, and ease of management. With its Gigabit Ethernet capabilities, VLAN and QoS support, user-friendly interfaces, and energy-efficient design, the TigerSwitch is well-equipped to meet the diverse needs of modern networking environments, offering reliable solutions that cater to both current demands and future expansions.
Top Page Image Contents