Kenmore 790.4943 To Set Add 1 Minute Feature, Setting the Oven Lockout, Operating Oven Lights

Oven Controls

To Set Add 1 Minute Feature

The A key is used to set the Add 1 Minute feature. When the key is pressed, 1 minute is added to the Timer feature if this feature is already active. If the Minute Timer feature is not

active and the A is pressed, the Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above..

Setting the Oven Lockout

The controls the Oven Lockout feature. The Oven Lockout featureautomatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Timer or the interior oven lights. The ovens can be locked individually.

To activate the Oven lockout feature:

1.Press and hold for 3 seconds.

2.After 3 seconds, DOOR, LOCKED will flash and Loc will appear in the display

Once the oven door is locked the DOOR and LOCKED indicator will stop flashing and remain in the display. Allow 15 seconds for the oven door to lock.

To reactivate normal oven operation by unlocking door:

1. Press and hold for 3 seconds. Loc will disappear from the display. DOORand LOCKED will flash in the display until the door has completely unlocked and the oven will be operational.

Operating Oven Lights

The interior oven lights will turn ON when the oven door is opened.

Press to turn oven light ON an OFF whenever the oven door is closed.

The interior oven lights are located on the rear wall of the oven interior and are covered with a glass shield. The glass shield protects the bulb from high temperatures and should always be in place whenever the oven is in use.

To replace the interior oven lights, see Replacing oven lights in the Care and Cleaning section.

Setting Silent Control Operation

The Self-Cleanand Delay Start keys control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change from normal sound to silent operation:

1.Press and hold Delay Start for 7 seconds. The display will show dashes and then change to bEEP ON in the display.

2.Press Self-Cleanto switch between normal sound operation and silent mode (beep off).

Press	to accept the change or press	to reject the
change.

Note: The control will always beep at the end of a timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

Restoring factory default settings

Your appliance is programmed with default control settings. Over time, users may make changes to these settings. The following options have settings that can be modified and may have been changed since the appliance was new:

•12 or 24 hour display mode

•Continuous bake or 12-Hour Energy Savings mode

•Silent or audible control

•Oven temperature display (Fahrenheit or Celsius)

•Oven temperature adjustments (offsets)

•Stored recipes

If you choose to restore factory default settings, ALL of the above user preferences will be restored to their original settings (factory default). The oven temperature offset will reset and any stored recipes will be cleared.

To restore oven control to factory default settings:

1.When the oven is in idle and no cooking function is in oper- ation, press and hold the 7 key until the acceptance tone sounds (about 6 seconds)

2.Press START. The control is now reset to default settings.

10