Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
To remove the oven door:
1.Open oven door completely, horizontal with floor (See Figure 7).
2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely toward the oven door (See Figure 8). A tool such as a small
3.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).
4.Close the door to approximately 10 degrees from the oven door frame.
5.Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 9).
To Replace Oven Door:
1.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).
2.Holding the oven door at the same angle as the removal position (See Figure 9), seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 10). The hook of the hinge arms must be fully seated onto the roller pins.
3.Fully open the oven door, horizontal with floor (See Figure 7).
4.Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 8).
5.Close the oven door.
Important:
Special Door Care Instructions - Most oven doors contain glass that can break. Do not close the oven door until all the oven racks are fully in place. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
Care and Cleaning
Oven door
hinge
locations
Figure 7: Door hinge location
|
| K |
| C | |
O |
| |
L |
|
|
Figure 8: Door hinge locks
about 10°
oven door
hinge
Figure 9: Holding door for removal
roller
pin
hinge arm
Figure 10: Location of hinge arm and roller pin
19