Kenmore 790.4941, 790.4943 Setting the Clock, Setting Continuous Bake or 12 Hour Energy Saving

Setting the Clock

The key is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been

interrupted, the time in the display will flash. Press . The display will stop flashing.

Example: Setting the clock for 1:30:

1.1 Press . CLO will appear in the display. )

2.Press 1 3 0 keys to set time of day. Press

3.Time of day will now appear in the display.

Oven Controls

Setting Continuous Bake or 12 Hour Energy Saving

The Timer on-offand Self-Cleankeys control the Continuous Bake or 12 hour Energy Saving features. The oven control has a factory preset 12 Hour Energy Saving feature that shuts off the oven control if left on for more than 11 hours and59 minutes. The oven can be programed to override this feature for Continuous baking.

To set the Continuos Bake or 12 Hour Energy feature:

1.Press and hold Timer on-offfor about 7 seconds. The dashes will change to show either 12Hr OFF or Stay On in the display and the control will beep once.d

Changing between 12 or 24 hour time of day display

1. Press and hold for 7 seconds until 12Hr or 24Hr appears in the display.

2.Press Self-Cleanto switch between the 12 and 24 hour time of day displays. The display will show either 12Hr of 24Hr (figure)

2.Press Self-Cleanto switch between the 12Hr Energy saving and Continuous Bake features. Note: 12 Hr OFF indicates the control is set for the 12 hour energy saving mode. Stay On indicates the control is set for the Continuous Bake mode.

3. Press to accept your selection and the display will return to show the time of day.

3.Press to accept the change or press to reject.

4.Reset the correct time as prescribed in Setting the Clock above. Note: if the 24 hour time of day was selected, the clock will now display time from 0:00 through 23:59 hours.

Setting Oven Timer

The Timer on-offcontrols the Timer and serves as an extra timer that will beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control functions, except Self-Clean and Sabbath.

To set Timer (example 5 minutes)

1.Press Timer on-off. When dashes appear in the display

press the number 5 key (for this example) and press	.
The time will begin to count down.

2.Note: If the start key is not pressed timer will return to time of day after 30 seconds.

3.When timer runs out, End and TIMER show in display. The clock will beep 3 times every 30 seconds until Timer on-offis pressed. Press Timer on-offto cancel the timer at any time. Once canceled the display show the time of day.

9