SMC Networks TigerSwitch manual File Directory Information

FLASH/FILE COMMANDS

-boot-rom- Boot ROM (or diagnostic) image file.

-config - Switch configuration file.

-opcode - Run-time operation code image file.

-filename - Name of the configuration file or image name.

-unit - Stack unit. (Range: 1-8)

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•If you enter the command dir without any parameters, the system displays all files.

•A colon (:) is required after the specified unit number.

•File information is shown below:

Table 4-26 File Directory Information

Column Heading	Description
file name	The name of the file.
file type	File types: Boot-Rom, Operation Code, and Config file.
startup	Shows if this file is used when the system is started.
size	The length of the file in bytes.

Example

The following example shows how to display all file information:

Console#dir 1:
file name	file type	startup size (byte)
---------------------------- --------------		------- -----------
Unit1:
DIAG_0.0.0.4.BIX	Boot-Rom image		Y	169900
LEO_50Y_V0.0.5.1.bix	Operation Code		Y	1614764
Factory_Default_Config.cfg	Config File		N	5013
startup	Config File		Y	3191

-------------------------------------------------------------------

Total free space: 5242880

Console#

4-93