LINK AGGREGATION COMMANDS

•priority - This priority is used to determine link aggregation group (LAG) membership, and to identify this device to other switches during LAG negotiations. (Range: 0-65535)

Default Setting

32768

Command Mode

Interface Configuration (Ethernet)

Command Usage

•Port must be configured with the same system priority to join the same LAG.

•System priority is combined with the switch’s MAC address to form the LAG identifier. This identifier is used to indicate a specific LAG during LACP negotiations with other systems.

•Once the remote side of a link has been established, LACP operational settings are already in use on that side. Configuring LACP settings for the partner only applies to its administrative state, not its operational state, and will only take effect the next time an aggregate link is established with the partner.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#lacp actor system-priority 3

Console(config-if)#

4-169

Page 410 Page 412
Page 411
Image 411
SMC Networks TigerSwitch manual 169, 32768
Page 410 Page 412

TigerSwitch specifications

The SMC Networks TigerSwitch series represents a robust line of Ethernet switches designed to cater to a wide range of networking needs, from small businesses to enterprise environments. With a strong emphasis on performance, reliability, and ease of use, the TigerSwitch series has garnered a reputation for delivering effective solutions for today’s demanding data communication requirements.

One of the standout features of the TigerSwitch is its support for Gigabit Ethernet, which enables higher data transfer rates and reduced latency. This performance boost is crucial for businesses that rely on bandwidth-heavy applications such as VoIP, video conferencing, and large file transfers. Many models in the series come with multiple Gigabit Ethernet ports, providing businesses with the flexibility to connect various devices and expand their networks seamlessly.

The TigerSwitch series also incorporates advanced Layer 2 switching capabilities, including features such as VLAN support and QoS (Quality of Service). VLAN support allows network administrators to segment network traffic, enhancing security and improving overall network performance. By segregating traffic based on user groups or applications, VLANs help manage bandwidth more effectively. QoS is particularly important in environments where voice and video services compete for bandwidth, as it prioritizes critical applications ensuring minimal interruptions in service quality.

Another key characteristic of the TigerSwitch is its user-friendly management interface. Many models come with web-based management capabilities, making it simpler for network administrators to configure settings, monitor performance, and troubleshoot issues. Additionally, the series supports SNMP (Simple Network Management Protocol), allowing for centralized network management and monitoring, which is essential for larger networks.

The TigerSwitch series also promotes energy efficiency, aligning with modern eco-friendly practices. Many of the switches feature Power over Ethernet (PoE) support, allowing them to deliver power to connected devices such as IP cameras and wireless access points over the same Ethernet cable used for data. This not only simplifies cabling requirements but also contributes to reducing overall power consumption, which is a consideration for both cost savings and environmental impact.

In conclusion, the SMC Networks TigerSwitch series stands out due to its combination of performance, advanced features, and ease of management. With its Gigabit Ethernet capabilities, VLAN and QoS support, user-friendly interfaces, and energy-efficient design, the TigerSwitch is well-equipped to meet the diverse needs of modern networking environments, offering reliable solutions that cater to both current demands and future expansions.
Top Page Image Contents