COMMAND LINE INTERFACE

Related Commands

switchport mode (4 -202)

switchport ingress-filtering

This command enables ingress filtering for an interface. Use the no form to restore the default.

Syntax

[no] switchport ingress-filtering

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

Ingress filtering only affects tagged frames.

If ingress filtering is disabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be flooded to all other ports (except for those VLANs explicitly forbidden on this port).

If ingress filtering is enabled and a port receives frames tagged for VLANs for which it is not a member, these frames will be discarded.

Ingress filtering does not affect VLAN independent BPDU frames, such as GVRP or STA. However, they do affect VLAN dependent BPDU frames, such as GMRP.

Example

The following example shows how to set the interface to port 1 and then enable ingress filtering:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport ingress-filtering

Console(config-if)#

4-204

Page 446
Image 446
SMC Networks TigerSwitch manual 204, Switchport ingress-filtering, Switchport mode 4

TigerSwitch specifications

The SMC Networks TigerSwitch series represents a robust line of Ethernet switches designed to cater to a wide range of networking needs, from small businesses to enterprise environments. With a strong emphasis on performance, reliability, and ease of use, the TigerSwitch series has garnered a reputation for delivering effective solutions for today’s demanding data communication requirements.

One of the standout features of the TigerSwitch is its support for Gigabit Ethernet, which enables higher data transfer rates and reduced latency. This performance boost is crucial for businesses that rely on bandwidth-heavy applications such as VoIP, video conferencing, and large file transfers. Many models in the series come with multiple Gigabit Ethernet ports, providing businesses with the flexibility to connect various devices and expand their networks seamlessly.

The TigerSwitch series also incorporates advanced Layer 2 switching capabilities, including features such as VLAN support and QoS (Quality of Service). VLAN support allows network administrators to segment network traffic, enhancing security and improving overall network performance. By segregating traffic based on user groups or applications, VLANs help manage bandwidth more effectively. QoS is particularly important in environments where voice and video services compete for bandwidth, as it prioritizes critical applications ensuring minimal interruptions in service quality.

Another key characteristic of the TigerSwitch is its user-friendly management interface. Many models come with web-based management capabilities, making it simpler for network administrators to configure settings, monitor performance, and troubleshoot issues. Additionally, the series supports SNMP (Simple Network Management Protocol), allowing for centralized network management and monitoring, which is essential for larger networks.

The TigerSwitch series also promotes energy efficiency, aligning with modern eco-friendly practices. Many of the switches feature Power over Ethernet (PoE) support, allowing them to deliver power to connected devices such as IP cameras and wireless access points over the same Ethernet cable used for data. This not only simplifies cabling requirements but also contributes to reducing overall power consumption, which is a consideration for both cost savings and environmental impact.

In conclusion, the SMC Networks TigerSwitch series stands out due to its combination of performance, advanced features, and ease of management. With its Gigabit Ethernet capabilities, VLAN and QoS support, user-friendly interfaces, and energy-efficient design, the TigerSwitch is well-equipped to meet the diverse needs of modern networking environments, offering reliable solutions that cater to both current demands and future expansions.