SMC Networks TigerSwitch manual Configuration Commands

ENTERING COMMANDS

Privileged Exec mode from within Normal Exec mode, by entering the enable command, followed by the privileged level password “super” (page 4-37).

To enter Privileged Exec mode, enter the following user names and passwords:

Username: admin

Password: [admin login password]

CLI session with the SMC6624M is opened.

To end the CLI session, enter [Exit].

Console#

Username: guest

Password: [guest login password]

CLI session with the SMC6624M is opened.

To end the CLI session, enter [Exit].

Console>enable

Password: [privileged level password]

Console#

Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in non-volatile storage, use the copy running-configstartup-configcommand.

The configuration commands are organized into different modes:

•Global Configuration - These commands modify the system level configuration, and include commands such as hostname and snmp-server community.

•Access Control List Configuration - These commands are used for packet filtering.

•Interface Configuration - These commands modify the port configuration such as speed-duplexand negotiation.

4-9