Raymarine E55061 manual Planning the installation, Where can the SeaTalk2 Keyboard be mounted?

Planning the installation

Where can the SeaTalk2 Keyboard be mounted?

The Seatalk2 keyboard can be flush or trunnion mounted either indoors or outdoors. It is waterproof to CFR-46 standard.

Important:

The drain tube is not required if the keyboard is mounted indoors or in an area protected from rain and/or sea spray. If mounting the keyboard outdoors or in an unprotected area the drain tube will need to run to a suitable exit point below the level of the keyboard.

What configuration should I use?

How you connect the keyboard depends on the distances between your E-Series Display, the keyboard and power source and whether or not you are connecting the keyboard to an existing SeaTalk2 system. Select the appropriate configuration from the following:

Configuration 1

Cable length between E-Series Display and keyboard less than 4.5m and Not linking into an existing SeaTalk2 system.

Supplied in the box	Not supplied/accessory/	E Series display
	existing system

E-Series Display

SeaTalk2 Keyboard

Keyboard cable
(attached/3 m)	SeaTalk2 cable (1.5 m)

SeaTalk2 Power/RF ground cable (1.5 m)

		5A circuit breaker
		Or:
Terminator	Terminator	Switch with 5A fuse
Junction box		red	black	grey

12v supply

D7680-1

4