Installation (cont’d)
2. Make certain the claw extractor is aligned with the
(See Pictures 1a & 1b)
Correct |
| Incorrect |
|
|
|
Picture 1a | Picture 1b |
Note: Model 799 actions do not utilize a rotating claw extractor
The bolt guide must be aligned with the locking lug on the same side as the bolt handle.
(See Pictures 2a & 2b)
Correct
Picture 2a
Incorrect
Picture 2b
3.Insert the bolt into the receiver aligning the lugs on the bolt with the lug tracks in the receiver. With the left hand, swing the bolt release lever open and push the bolt fully forward through the channel in the receiver. (See Picture 3)
Picture 3
Release the bolt release lever after the lugs on the bolt clear the box. Lower the bolt handle all the way down into the locked position. The firing pin is now cocked and the safety mechanism may be placed in the “safe” position.
6
