Panasonic KX-FLB811 3.1 Using the unit as a fax machine, 3.2 Sending a fax manually

3. Fax

28

3FaxSending Faxes

3.1 Using the unit as a fax machine

3.1.1 Entering the fax mode

Before sending a fax, set the operation mode to

the fax mode.

Press {FAX} to turn the {FAX } light ON.

Note:

LYou can change the default operation mode

(feature #463 on page 60) and the timer

before returning to the default operation

mode (feature #464 on page 60).

LReceived documents will be stacked on the

lower output tray. You can change the output

tray for faxing (Feature #441 on page 63)

(KX-FLB811 only).

3.2 Sending a fax manually

3.2.1 Using the auto document

feeder

LConfirm that there are no documents on

the scanner glass.

1If the {FAX} light is OFF, turn it ON by

pressing {FAX}.

2Adjust the width of the document guides (1)

to fit the actual size of the document.

3Insert the document (up to 40 pages) FACE

UP into the feeder until a single beep is

heard.

LIf the document guides are not adjusted

to fit the document, re-adjust them.

4If necessary, change the following settings

according to the type of document.

LTo select the resolution, see page 28.

LTo select the contrast, see page 28.

5Press {MONITOR}.

6Dial the fax number.

7Press {START}.

Note:

LAny document which can be sent as a fax can

also be copied and scanned (page 30).

LDo not open the document cover when

sending a fax with the auto document feeder.

To stop sending

Press {STOP}.

To select the resolution

1. Press {RESOLUTION}.

2. Press {V} or {^} repeatedly to select the

desired resolution.

–“STANDARD”: For printed or typewritten

documents with normal-sized characters.

–“FINE”: For documents with small print.

–“SUPER FINE”: For documents with very

small print. This setting is effective only

when the other party has a compatible fax

machines.

–“PHOTO”: For documents containing

photographs, shaded drawings, etc.

LUsing the “FINE”, “SUPER FINE” and

“PHOTO” settings will increase transmission

time.

LIf the resolution setting is changed during

feeding, it will be effective from the next page.

To select the contrast

You can adjust this setting depending on the

darkness or lightness of the document. 5 levels

(light to dark) are available.

1. Press {CONTRAST}.

2. Press {V} or {^} repeatedly to select the

desired contrast.

{FAX}

{FAX}{STOP}

{START}

{SET}{V}{^}

{REDIAL}

{MONITOR}

{CONTRAST}

{RESOLUTION}

{QUICK SCAN}

FLB811-PFQX2307ZB-en.book Page 28 Thursday, February 16, 2006 3:57 PM