6. Copy

45

To stop copying

Press {STOP}.

To select the resolution

1. Press {RESOLUTION}.
2. Press {V} or {^} repeatedly to select the
desired resolution.
TEXT/PHOTO: For documents
containing both text and photographs.
TEXT: For documents containing only
text.
PHOTO: For documents containing
photographs, shaded drawings, etc.
Note:
LYou can change the default resolution in
feature #461 (page 65).

To select the contrast

You can adjust this setting depending on the
darkness or lightness of the document. 5 levels
(light to dark) are available.
1. Press {CONTRAST}.
2. Press {V} or {^} repeatedly to select the
desired contrast.
LTo make lighter, press {V}.
LTo make darker, press {^}.
Note:
LYou can save the previous contrast setting in
feature #462 (page 65).
6.2.2 Using the scanner glass
LConfirm that there are no documents in
the auto document feeder.
1If the {COPY} light is OFF, turn it ON by
pressing {COPY}.
2Set the original.
1. Open the document cover (1).
2. Place the document FACE DOWN on the
scanner glass (2), matching the top
edge of the document to the l mark on
the unit.
3. Close the document cover.
LIf the original is a thick book, do not
close the document cover.
3If necessary, change the following settings
according to the type of document.
LTo select the resolution, see page 45.
LTo select the contrast, see page 45.
4If necessary, enter the number of copies (up
to 99).
5Press {START}.
LThe unit will start copying.
6After you finish copying, press {STOP} to
reset the settings you set in step 3 and 4.
Note:
LThe effective scanning area is changed
depending on the setting of the paper size
(feature #380 on page 60). If you select
LEGAL for the paper size, the effective
scanning area will be maximized (page 30).

To stop copying

Press {STOP}.
1
{START}
{STOP}
{COPY}
2
FLB811-PFQX2307ZB-en.book Page 45 Thursday, February 16, 2006 3:57 PM