1. Introduction and Installation
16 For assistance, please visit http://www.panasonic.com/consumersupport
2Pull the output tray extender (1) forward
gently until it clicks into place, then press the
center part of the extender (2) to open.
LRepeat from step 1 to install the upper
output tray.
Note:
LThe upper output tray can hold up to
approximately 100 sheets of printed paper.
The lower output tray can hold up to
approximately 50 sheets of printed paper.
Remove the printed paper before the output
tray becomes full.
1.7.2 For KX-FLB801 users
Pull the output tray extender (1) forward gently
until it clicks into place, then press the center
part of the extender (2) to open.
Note:
LThe output tray can hold up to approximately
150 sheets of printed paper. Remove the
printed paper before the output tray becomes
full.

If the top part of the extender is detached

1. With the top part of the extender in the open
position, insert the tab (1) into the left hole
(2) of the extender.
1
2
1
2
1
2
FLB811-PFQX2307ZB-en.book Page 16 Thursday, February 16, 2006 3:57 PM