7. Multi-Function Station software

53

Do not attempt to print on any of the
following types of envelopes (these may
cause damage to the unit):
LEnvelopes with clasps, snaps or tie strings
LEnvelopes with transparent windows
LEnvelopes that use encapsulated types of
adhesive that do not require moistening but
rely on pressure to seal them
Scanning
7.5 Using the unit as a scanner
LKeep the front cover page open for button
locations.

7.5.1 Using Multi-Function

Viewer

1Set the original.
Using the auto document feeder
Insert the document (up to 40 pages) FACE
UP into the feeder until a single beep is
heard.
LConfirm that there are no documents on
the scanner glass.
Using the scanner glass
Place the document FACE DOWN on the
scanner glass, matching the top edge of the
document to the l mark on the unit.
LConfirm that there are no documents in
the auto document feeder.
2Start Multi-Function Station.
3Select [Viewer(Scan)].
L[Multi-Function Viewer] will appear.
4Click the [Scan] icon in the [Multi-Function
Viewer] window.
LThe [Panasonic KX-FLB811]/
[Panasonic KX-FLB801] (default name)
dialog box will appear.
5If necessary, change the scanning settings
on your computer.
LTo preview the scanned image, click
[Preview]. Only first page will be
displayed. You can drag the frame to
specify the scanned area. If you change
the scan mode, brightness, or contrast
setting, click [Preview] to refresh the
scanned image. If you use the auto
document feeder, set the document again
before refreshing the scanned image.
LIf you select [B/W Graphic] for scan
mode, the resolution range will be from
150 to 600 dpi.
6Click [Scan].
LIf you preview the scanned image using
the auto document feeder in step 5, set
the document again and click [Scan].
LThe scanned image will be displayed in
the [Multi-Function Viewer] window
after scanning.
Twisted Curled Bent-edged
Waved Dog-eared Self adhesive
Clasp Transparent window
FLB811-PFQX2307ZB-en.book Page 53 Thursday, February 16, 2006 3:57 PM