9. Help
67
For assistance, please visit http://www.panasonic.com/consumersupport
9.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
“CALL SERVICE”LThere is something wrong with the unit. Contact our service
personnel.
“CARRIAGE ERROR”LThere is something wrong with the carriage sensor. Contact our
service personnel.
“CHANGE DRUM”
“CHANGE SUPPLIES”
LThere is something wrong with the drum unit. Replace the drum
unit and the toner cartridge (page 76).
“CHECK DOCUMENT”LThe document was not fed into the unit properly. Re-insert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 87) and try again.
“CHECK DRUM”LThe drum unit is not inserted properly. Re-insert it correctly (page
13).
“CHECK MEMORY”LThe memory (telephone numbers, parameters, etc.) has been
erased. Re-program.
“CHECK PICK UP
INPUT TRAY #1”
LRecording paper was not fed into the unit properly. Re-insert the
recording paper (page 82).
Note:
L“#1”: Paper input tray
L“#2”: Manual input tray
“CLOSE ADF COVER”LThe ADF cover is open. Close it.
“DIRECTORY FULL”LThere is no space to store new items in navigator directory. Erase
unnecessary items (page 32).
“DRUM LIFE LOW
REPLACE SOON”
LThe drum life is near to an end. Replace the drum unit as soon as
possible (page 76).
“FAX IN MEMORY”LThe unit has a document in memory. See the other displayed
message instructions to print out the document. For fax memory
capacity, see page 90.
LIf feature #442 is set to “ALWAYS” (page 64), check the connection
between the computer and the unit.
“KEEP COPYING”LCopying has stopped due to a lack of recording paper or
misfeeding of recording paper. See the other displayed message
instructions to continue copying.
“LOW TEMP.”LThe inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
“MEMORY FULL”LWhen performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
LWhen making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
FLB811-PFQX2307ZB-en.book Page 67 Thursday, February 16, 2006 3:57 PM