3. Fax

35

8Press {STOP} to exit.
3.6.4 Sending the same document to pre-programmed parties
LMake sure that the {FAX} light is ON.
1Insert the document FACE UP into the
feeder.
LConfirm that there are no documents
on the scanner glass.
2If necessary, change to the desired
resolution (page 28) and the desired contrast
(page 28).
3Press the desired {BROADCAST} (1-2) or
{MANUAL BROAD}.
LThe document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
LAfter transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (broadcast
sending report).
Note:
LDo not open the document cover when
sending a fax with the auto document feeder.
LIf you select FINE, SUPER FINE or
PHOTO resolution, the number of pages
that the unit can send will decrease.
LIf the document exceeds the memory
capacity, sending will be canceled.
LIf a party is busy or does not answer, it will be
skipped and redialed later 1 time.

To send the same document using the

scanner glass

LConfirm that there are no documents in
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Press the desired {BROADCAST} (1-2) or
{MANUAL BROAD}.
LTo send a single page, skip to step 6.
LTo send multiple pages, go to the next
step.
4. Place the next page.
5. Press {SET}.
LTo send more pages, repeat steps 4 and
5.
6. Press {START}.

To cancel broadcast transmission

1. Press {STOP} repeatedly until SEND
CANCELED? is displayed.
2. Press {SET}.
Receiving Faxes
FLB811-PFQX2307ZB-en.book Page 35 Thursday, February 16, 2006 3:57 PM