Panasonic KX-FLB811 manual Broadcast transmission, Programming items into the broadcast memory

3. Fax

3.6Broadcast transmission

By storing one-touch dial and navigator directory items (page 31) into the broadcast memory, you can send the same document to multiple parties (up to 20). Your programmed items will remain in the broadcast memory, allowing frequent re-use.

LThe broadcast function utilizes stations 1–3. The one-touch dial function will be canceled.

LKeep the front cover page open for button locations.

LMake sure that the {FAX} light is ON.

3.6.1Programming items into the broadcast memory

1Press {MENU} repeatedly to display “DIRECTORY SET”.

2Select the desired broadcast key.

For BROADCAST 1-2:

1.Press the desired {BROADCAST} key.

2.Press {V} or {^} repeatedly to select “BROADCAST”.

For MANUAL BROADCAST:

1.Press {MANUAL BROAD}.

2.Press {V} or {^} repeatedly to select “MANUAL BROAD”.

3Press {SET}.

4Program items.

Using stations 1–7:

Press the desired station key.

Using stations 8–14:

Press {LOWER}, then press the desired station key.

Using navigator directory:

Press {V} or {^} repeatedly to display the desired item, and press {SET}.

Using the dial keypad (only for MANUAL BROAD):

Enter the fax number and press {SET}.

L To program other items, repeat this step (up to 20 items).

LIf you program the wrong item, press {STOP} to erase the item.

5Press {SET} after programming all of the desired items.

L To program another broadcast key, repeat steps 2 to 5.

6Press {STOP} to exit.

Note:

LConfirm the stored items by printing a broadcast programming list (page 89).

3.6.2Adding a new item into the broadcast memory

After initial programming, you can add new items (up to a combined total of 20).

1Press {DIRECTORY}.

2Press {V} or {^} repeatedly to display the desired broadcast memory (“<BROADCAST1>”, “<BROADCAST2>” or “<MANUAL BROAD>”).

3Press {MENU}.

4Press {*}.

5Press {V} or {^} repeatedly to display the desired item you want to add.

6Press {SET}.

LTo add other items, repeat steps 5 and 6 (up to 20 items).

7Press {STOP} to exit.

Note:

LWhen adding new items to the MANUAL BROADCAST memory, you can only select stored items.

3.6.3Erasing a stored item from the broadcast memory

1Press {DIRECTORY}.

2Press {V} or {^} repeatedly to display the desired broadcast memory (“<BROADCAST1>”, “<BROADCAST2>” or “<MANUAL BROAD>”).

3Press {MENU}.

4Press {#}.

5Press {V} or {^} repeatedly to display the desired item you want to erase.

L To cancel erasing, press {STOP}.

6Press {SET}.

7Press {SET}.

LTo erase other items, repeat steps 5 to 7.

34