Panasonic KX-FLB811 manual Transparencies, Labels

7. Multi-Function Station software

For details about the [Print] dialog box, click [?], then click the desired item.

Note:

LFor Microsoft PowerPoint®, select [Color] or remove the check next to [Grayscale] in the print dialog so that colored text will be printed in grayscale.

3Select [Panasonic KX-FLB811]/

[Panasonic KX-FLB801]as the active printer.

L If you have changed the name of the unit when installing, select that name from the list.

L To change the printer settings, proceed as follows.

For Windows 98/Windows Me:

Click [Properties], then click the desired tab. Change the printer settings, then click [OK].

For Windows 2000:

Click the desired tab and change the printer settings.

For Windows XP:

Click [Preferences], then click the desired tab. Change the printer settings, then click [OK].

4Click [Print] or [OK].

LThe unit will start printing.

Note:

LTo load paper, see page 18, 19.

LWhen using the manual input tray, load the recording paper after step 4.

LFor details about the paper specifications, see page 51, 91.

Setting the printer properties

You can change the printer setting in step 3. We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities.

You can change the settings on following tabs. Paper: Paper size, paper type, etc.

Output: Pages per sheet, output tray (KX- FLB811 only), etc.

Quality: Graphics mode, resolution, toner save feature, etc.

Note:

LTo select [Envelope] for paper type on the [Paper] tab, you need to select [Envelope

#10] or [Envelope DL] for paper size.

LYou can select the output tray for each printing on the [Output] tab. To change the

default output tray, see page 56 (KX-FLB811 only).

LWhen printing from a computer, the toner save feature on the [Quality] tab overrides the unit’s toner save setting (feature #482 on page 60).

7.4.2 Transparencies

Use transparencies designed for laser printing. We recommend the following:

3M® CG3300/CG5000

LUse the manual input tray to print transparencies.

LLoad transparency sheets one page at a time for printing, print-side down.

LPrinted transparency will be stacked on the upper output tray (KX-FLB811 only).

LRemove each transparency after printing and place it on a flat surface to cool and to

prevent it from curling.

LDo not re-use transparencies that have already been fed through the unit. This includes transparencies that have been fed

through and ejected without being printed on.

LSome types of transparencies have instructions recommending which side to print on. If the print quality is poor, try printing on the other side.

7.4.3 Labels

Use labels designed for laser printing. We recommend the following:

Avery® 5160/5161/5162/5163/5164/5165/5167/5168

XEROX® LWH100/LWH110/LWH120/LWH130/LWH140

LUse the manual input tray to print labels. L Load label sheets one page at a time for

printing, print-side down.

L Printed label will be stacked on the upper output tray (KX-FLB811 only).

L Remove each label after printing.

L Do not use the following types of labels:

51