JVC HM-DR10000EU specifications Satellite Tuner Users, VHS mode Press STD/LS3, VHS or VHS mode

TIMER

äTIMER indicator

1– –:– –

2	DAILY				K		Y
1	2	3
				E		L
			E
4	5	6	W		3

			EN	31
4	SET TAPE SPEED
	D-VHS mode:
	Press STD/LS3 (	) to set the tape speed.
	S-VHS or VHS mode:
	Press SP/LP (	) to set the tape speed.
5	SET VPS/PDC MODE
	Press VPS/PDC to select "ON" or "OFF".
	If "VPS/PDC ON" is displayed on the screen or "VPS/
	PDC" is lit on the display panel, VPS/PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
	is not lit on the display panel, VPS/PDC is set to OFF.
	☞ "VPS/PDC Recording" on page 33.
	RETURN TO NORMAL SCREEN
	Press PROG or OK. "PROGRAM COMPLETED" appears
	on the screen for about 5 seconds, then normal screen
6 appears.
	● Repeat steps 1 – 6 for each additional programme.
7	ENGAGE RECORDER’S TIMER MODE
	Press ä (or äTIMER). The recorder turns off automati-
	cally and ä appears on the display panel. The äTIMER
	indicator on the recorder also lights up.

VPS/PDC 7 8 9

0

1

PROG 2

STOP+/–

4

4

STD/LS3 (SP/LP)

3 OK

● To disengage the timer, press ä (or äTIMER) again.

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– in step 3. You can compensate for

anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . in step 3, press WEEKLY (NUMBER key "9") for weekly

serials or DAILY (NUMBER key "8") for daily serials (Monday

– Friday). Either "WEEKLY" or "DAILY" appears on the screen.

Pressing the button again makes the corresponding indication

disappear.

￿

● You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen and "FULL" appears

on the front display panel. To record the extra programme, you

must first cancel any unnecessary programmes (☞ pg. 34).

● It is not possible to timer-record a TV programme with a

SHOWVIEW number which starts with "0".

Satellite Tuner Users

To timer-record a satellite broadcast using the SHOWVIEW system:

1	Set "AV2 SELECT" to "AV2" or "SAT" (☞ pg. 54).
2	Perform steps 1 – 7.
3	Set the satellite tuner to the appropriate channel before
	the selected programme begins.

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

●Press the NUMBER keys or %Þ to input the channel position number on which your recorder receives that station, then press OK or #to set the Guide Program number. The SHOWVIEW program screen appears.

4 Leave the satellite tuner's power on.

GUIDE PROG SET

GUIDE PROG	TV PROG
2	– –
[5°] =
[PROG] : EXIT

(Ex.) To timer-record a ZDF programme with the SHOWVIEW system.

*If your recorder receives ZDF on the channel position 2, press OK or # after entering "2".