JVC HM-DR10000EU Access Main Menu Screen, Access Video Navigation Screen, Check Memory

Checking Memory

You can check the amount of recorded information in the memory.

		ACCESS MAIN MENU
		SCREEN
1 Press MENU.
		ACCESS VIDEO
		NAVIGATION SCREEN
	Press %Þ to move the			MAIN MENU
		highlight bar (pointer) to
2 "VIDEO NAVIGATION",				MODE SET
				AUTO CH SET
		then press OK or #.		MANUAL CH SET
				INITIAL SET
				VIDEO NAVIGATION
			[5°] =
				[MENU] : EXIT
3		CHECK MEMORY
	Press %Þ to move the			VIDEO NAVIGATION
		highlight bar (pointer) to
				SORTING
		"CHECKING MEMORY",
		then press OK or #.		EDITING
				CHECKING MEMORY	: ON
				NAVIGATION

●The CHECKING MEMORY screen will appear.

[5°] = [MENU] : EXIT

CHECKING MEMORY

0100

[MENU] : EXIT

RETURN TO NORMAL

SCREEN

4 Press MENU.

EN39

Turn Off Navigation

If you don't want to record information on the programmes, set "NAVIGATION" to "OFF".

Perform steps 1 to 2 of "Checking Memory" in the left column before continuing.

TURN OFF NAVIGATION

Press %Þ to move the		VIDEO NAVIGATION
	highlight bar (pointer) to
1 "NAVIGATION", then		EDITING
		SORTING
	press OK or #to set to	CHECKING MEMORY
	"OFF".	NAVIGATION	: OFF
		[5°] =
		[MENU] : EXIT
	RETURN TO NORMAL
	SCREEN
2 Press MENU.

NOTES:

●Video Navigation is possible with the cassettes recorded with this recorder only.

●To record the date and time as the programme title in this recorder's memory, make sure the recorder's clock is set correctly before recording.

●To record the programme information in this recorder's memory, you must record each programme for over the minimum recording time; 10 min. for the D-VHS (STD) mode, 30 min. for the D-VHS (LS3) mode, 8 min. for the S-VHS/VHS (SP) mode or 15 min. for the S-VHS/VHS (LP) mode.

●Video Navigation may not work properly depending on the cassette being used.

●If the recorder finds two tape numbers in one tape while playing back or searching for the beginning of a programme, then when you remove the tape, the tape will be assigned just one number (smaller number).

●If you overwrite a programme from the beginning, the " " symbol is displayed for the title that was overwritten.

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

●After recording a tape with this recorder, write the tape number on a label and affix the label to the cassette in order to allow you to find the tape by its number.