JVC HM-DR10000EU specifications Synchro Editing, Synchro Edit connector Lanc Cable not provided

Set the appropriate input mode, depending on the connectors being used in step 1.

SET EDIT MODE

See "Picture Control" on page 49.

LOCATE START POINT

Start playback of the tape in the camcorder, and pause playback when you find the point where you want to start editing. Press and hold PAUSE and press RECORD on your recorder so that the recorder enters the Record- Pause Mode.

START SYNCHRO EDITING

Press SYNCHRO EDIT.

PAUSE SYNCHRO EDITING

3

4

5

Connect your recorder to camcorder (☞ pg. 50), and connect your recorder's SYNCHRO EDIT connector to the camcorder's LANC connector.

SET RECORDING MODE

Set the appropriate recording mode (S-VHS or VHS) (☞ pg. 23).

SET RECORDER'S INPUT MODE

1

2

EN 55

The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder with LANC connector and your video recorder.

MAKE CONNECTIONS

Synchro Editing

(S-VHS/VHS Mode Only)

SYNCHRO EDIT PAUSE RECORD

Recorder

SYNCHRO EDIT connector

LANC Cable (not provided)

Player

Camcorder To LANC connector

6

7 Press SYNCHRO EDIT again.

●Repeat steps 5 – 7 as necessary.

NOTES:

●The Synchro Editing function is impossible with the connec- tion using DV connector.

●The Synchro Editing function may not work with the initial part of a camcorder tape.

●The Synchro Editing function cannot be used when using the JLIP function. (Pressing SYNCHRO EDIT cancels the JLIP function.)

●The Synchro Editing function may not work properly with some type of camcorder.

●When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.